不卡中文字幕,中文在线视频观看,一区二区在线观看高清,一区二区三区在线观看视频,中文在线视频,日韩欧美电影在线,日韩中文视频

歡迎訪問濟南立強模具有限公司!

當前位置:首頁-新聞中心-公司新聞材料和產品的損壞會(huì )影響注塑加工成本高低

材料和產品的損壞會(huì )影響注塑加工成本高低

來源:http://www.tccaster.com/ 日期:2022-08-04

在估算一批塑料件注塑加工成本的時候,除了要將加工費、材料費、包裝費等都考慮在內之外,還要結合原料的損壞率進行計算。因為材料和產品的損壞會(huì )影響注塑加工成本的高低,到底有多大的影響呢?下面濟南注塑加工廠家為您講解下。
When estimating the injection molding processing cost of a batch of plastic parts, in addition to taking into account the processing cost, material cost, packaging cost, etc., it should also be calculated in combination with the damage rate of raw materials. Because the damage of materials and products will affect the cost of injection molding, how much impact? Next, Jinan injection molding manufacturer will explain to you.
先要知道哪些原因會(huì )造成注塑加工件的損壞,比較常見的有更換塑料模具時的洗模用料;熱度不夠造成的廢品;生產過程中產生的水口等等,這些都屬于損壞。
First of all, we should know what causes the damage of injection molding parts. The more common ones are the mold washing materials when replacing plastic molds; Waste products caused by insufficient heat; The nozzle produced in the production process is damaged.
也就是說,如果將一噸材料投入加工,結果生產出了0.7~0.8噸的產品,我們就會(huì )認為損耗率是20%~30%左右。
In other words, if one ton of material is put into processing, and 0.7~0.8 tons of products are produced, we will think that the loss rate is about 20% - 30%.
這樣的話,在計算成本的時候也要將這百分之二、三十的損壞率加進去,這樣得到的數據才會(huì )比較準確。事實上,這樣的損耗率還是比較正常的,而且如果要節約加工成本的話,也可以從降低材料損耗率著手。
In this case, the damage rate of 2% or 30% should also be added when calculating the cost, so that the data will be more accurate. In fact, such a loss rate is relatively normal, and if you want to save processing costs, you can also start from reducing the material loss rate.
濟南注塑加工
根據經驗進行估算模具的公式:
Formula for estimating mold price based on experience:
注塑模具=材料費+設計費+加工費和利潤+增值稅+模具試模費+包裝運輸費
Injection mold price = material fee + design fee + processing fee and profit + VAT + mold trial fee + packaging and transportation fee
比率通常為:
The ratio is usually:
材料費:材料和標準件占注塑模具總成本的15%-30%
Material cost: materials and standard parts account for 15% - 30% of the total cost of injection mold
手續費及利潤:30%-50%
Handling charges and profits: 30% - 50%
設計費:注塑模具總費用的10%-15%
Design fee: 10% - 15% of the total cost of injection mold
模具試模費:大中型模具可控制在3%之內,小型精密模具可控制在5%之內
Mold trial fee: large and medium-sized molds can be controlled within 3%, and small precision molds can be controlled within 5%
包裝運輸費:可按實際計算或3%計算
Packaging and transportation cost: it can be calculated according to the actual situation or 3%
增值稅:13%
VAT: 13%
為客戶報價時,我們將初次與您確認產品的使用情況。在選擇模具注塑時參考您要求的產品表面要求,是否需要做磨砂表面或鏡面表面,或者要求注塑模具的使用壽命能夠達到XX萬次。更多相關信息就來我們網站http://www.tccaster.com咨詢了解吧。
When quoting for customers, we will confirm the use of the product with you for the first time. When selecting the injection mold, refer to the product surface requirements you require, whether it is necessary to make frosted surface or mirror surface, or whether the service life of the injection mold can reach XX million times. Come to our website for more relevant information http://www.tccaster.com Consult and understand.

相關產品 / Related products

濟南立強模具有限公司

魯ICP備15002024號-2

網站地圖    TXT    XML
海阳市| 南昌县| 蓝田县| 合肥市| 正镶白旗| 定兴县| 梅河口市| 茶陵县| 长丰县| 白朗县| 汤阴县| 和平区| 潜山县| 蓬安县| 吉木萨尔县| 平凉市| 明星| 应用必备| 随州市| 古丈县| 涡阳县| 定陶县| 太和县| 城固县| 宽甸| 罗平县| 汉源县| 万山特区| 龙胜| 合阳县| 汕尾市| 建阳市| 应城市| 综艺| 湛江市| 通河县| 寻乌县| 淳安县| 宜宾县| 日土县| 垫江县|